| HardWare Specification of Banana pi BPI-F2
|
| Soc |
with freescale IMX6
|
| CPU |
|
| GPU |
|
| SDRAM |
|
| SATA |
support 1*SATA interface
|
| GPIO |
40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, I2S.
|
| On board Network |
10/100/1000Mbps Ethernet \(Realtek RTL8211E/D\)
|
| Wifi Module |
WiFi 802.11 b/g/n \(AP 6212 module on board\)
|
| Bluetooth |
BT4.0
|
| On board Storage |
MicroSD \(TF\) card,No eMMC onboard
|
| Display |
4-lane MIPI DSI display,or RGB panel or LVDS panel,TV-out on HDMI V1.4
|
| Video |
Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 decode up to 1080P60,support video encodeing:High-deinition\(HD\)H.264 video encoder is up to 1080P@45fps
|
| Audio outputs |
HDMI, analog audio \(via 3.5 mm TRRS jack\), I2S audio \(also potentially for audio input\)
|
| Camera |
A CSI input connector Camera:Supports 8-bit YUV422 CMOS sensor interface,Supports CCIR656 protocol for NTSC and PAL,Supports 5M pixel camera sensor ,Supports video capture solution up to 1080p@30fps
|
| Audio input |
On board microphone
|
| USB |
4 USB 2.0 host, 1 USB 2.0 OTG
|
| Buttons |
Reset button, Power button, U-boot button
|
| Leds |
Power status Led and RJ45 Led
|
| IR |
No onboard IR receiver
|
| DC Power |
5V/2A with micro USB port
|
| battery |
No 3.7V lithium battery power support
|
| Sizes |
85mmX56mm,same size as raspberry pi 3
|
| Weight |
40g
|
