Difference between revisions of "Banana Pi BPI-R2"
(→Hardware Revision) |
(→Hardware Revision) |
||
| Line 15: | Line 15: | ||
== Hardware interface== | == Hardware interface== | ||
[[Image:R2.jpg]] | [[Image:R2.jpg]] | ||
| + | |||
| + | == Hardware spec== | ||
| + | |||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | ! | ||
| + | ! Banana Pi R2 | ||
| + | |- | ||
| + | ! CPU | ||
| + | | MediaTek MT7623N, Quad-code ARM Cortex-A7 | ||
| + | |- | ||
| + | ! GPU | ||
| + | | Mali 450 MP4 GPU | ||
| + | |- | ||
| + | ! Memory | ||
| + | | 2G DDR3 SDRAM | ||
| + | |- | ||
| + | ! Storage | ||
| + | | On Board 8GB eMMC Flash, Micro SD-Card slot, Two SATA 2.0 Port (USB-to-SATA bridge) | ||
| + | |- | ||
| + | ! Network | ||
| + | | 10/100/1000 Mbit/s Ethernet (MT7530) + Wi-Fi 802.11 b/g/n 2.4G/5G (MT6625L) + Bluetooth BT4.1 with MTK6625L chip | ||
| + | |- | ||
| + | ! Display(s) | ||
| + | | HDMI (Type A) output with HDCP 1.4, resolutions up 1920x1200； MIPI Display Serial Interface (DSI) interface(4 data lanes) | ||
| + | |- | ||
| + | ! Video decoder(s) | ||
| + | | Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc. H.264 high-profile 1080p@60fps, HEVC/H.265 1080P@60fps | ||
| + | |- | ||
| + | ! Audio Output(s) | ||
| + | | HDMI & I2S | ||
| + | |- | ||
| + | ! USB ports | ||
| + | | USB 3.0 PORT (x2), USB OTG (x1) | ||
| + | |- | ||
| + | ! PCIE | ||
| + | | 1 pcie interface & 1 pcie pin define interface | ||
| + | |- | ||
| + | ! Remote | ||
| + | | IR Receiver (x1) | ||
| + | |- | ||
| + | ! GPIO | ||
| + | | 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). Some of I/O Pin can be used for specific functions as UART, I2C, SPI or PWM | ||
| + | |- | ||
| + | ! Switches | ||
| + | | Reset button, Power button, U-boot button | ||
| + | |- | ||
| + | ! LED | ||
| + | | Power Status and 8P8C | ||
| + | |- | ||
| + | ! Power Source | ||
| + | | 5 volt @2A via DC Power and/or Micro USB (OTG) | ||
| + | |- | ||
| + | ! Size & Weight | ||
| + | | 148 mm × 100.5mm 100g | ||
| + | |- | ||
| + | ! OS | ||
| + | | OpenWRT, Debian, Ubuntu, Raspbian and others OS | ||
| + | |} | ||
=Image Release= | =Image Release= | ||
Revision as of 20:35, 6 May 2018
Contents
Summary
Introduction
The Banana Pi R2 is a router based development board, which can run on a variety of open source operating systems including OpenWrt, Android, and Bananian. It has 4 Gigabit LAN ports, 1 Gigabit WAN, and 300Mbs wireless N capabilities.
Getting Start
Hardware Revision
Hardware interface
Error creating thumbnail: Unable to save thumbnail to destination
Hardware spec
| Banana Pi R2 | |
|---|---|
| CPU | MediaTek MT7623N, Quad-code ARM Cortex-A7 |
| GPU | Mali 450 MP4 GPU |
| Memory | 2G DDR3 SDRAM |
| Storage | On Board 8GB eMMC Flash, Micro SD-Card slot, Two SATA 2.0 Port (USB-to-SATA bridge) |
| Network | 10/100/1000 Mbit/s Ethernet (MT7530) + Wi-Fi 802.11 b/g/n 2.4G/5G (MT6625L) + Bluetooth BT4.1 with MTK6625L chip |
| Display(s) | HDMI (Type A) output with HDCP 1.4, resolutions up 1920x1200； MIPI Display Serial Interface (DSI) interface(4 data lanes) |
| Video decoder(s) | Multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc. H.264 high-profile 1080p@60fps, HEVC/H.265 1080P@60fps |
| Audio Output(s) | HDMI & I2S |
| USB ports | USB 3.0 PORT (x2), USB OTG (x1) |
| PCIE | 1 pcie interface & 1 pcie pin define interface |
| Remote | IR Receiver (x1) |
| GPIO | 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). Some of I/O Pin can be used for specific functions as UART, I2C, SPI or PWM |
| Switches | Reset button, Power button, U-boot button |
| LED | Power Status and 8P8C |
| Power Source | 5 volt @2A via DC Power and/or Micro USB (OTG) |
| Size & Weight | 148 mm × 100.5mm 100g |
| OS | OpenWRT, Debian, Ubuntu, Raspbian and others OS |
Image Release
Ubuntu
Kernel 4.14
- Image Link:
- Source Code Github Repo:
- Forum thread:
Kernel 4.4
- Image Link:
- Source Code Github Repo:
- Forum thread:
OpenWrt
Kernel 4.9
- Image Link:
- Source Code Github Repo:
- Forum thread:
